Boyo VTR113 User Manual page 11

B.
C.
D. Off (Disable)
5.
Parking Setting: This feature only applies with the use of OBDII connector.
Parking setting mode alllows recording while the car is turned off. When
it senses impact, the VTR113 will turn on automatically and start to record
thereafter.
A. Off (Disable impact sensing)
B.
C.
D. High (High sensitivity) *Triggered by light impact.
6.
Parking Monitor Mode: This feature only applies with the use of the OBDII
connector with "Parking Setting" to Low, Med, or High. When recording
during parking setting mode, choose the record setting for FPS (frames
per second).
A. 30 fps (records in better quality videos; results in large file size)
B.
7.
Parking Record Time: This feature only applies with the use of the OBDII
connector with "Parking Setting" to Low, Med, or High. When the VTR113
senses impact and starts to record, it will record for the below duration,
then turns off automatically. If it triggered by another impact thereafter, it
will restart the process.
A. 1 min
B.
C.
8.
Standby Delay: This feature only applies with the use of the OBDII
connector. Standby Delay feature lets the user record for additional
length of time after turning off the vehicle. The car must be turned off
while the unit was in recording mode for this feature to take effect.
A. Off (Disable)
B.
C.
9.
Date Stamp: This feature can show the time and date of the recording
embedded in the video.
A. Off (Disable)
B.
Medium (Medium sensitivity)
High (High Sensitivity) *Triggered by light impact.
Low (Low sensitivity) *Triggered by heavy impact.
Medium (Medium sensitivity)
1 fps (records in lesser quality videos; best for saving memory
capacity)
2 min
On (When triggered by impact, it will record continously. It will
stop recording when the battery is below 12VDC.
3 min (Records for 3 minutes after the car is turnd off )
5 min (Records for 5 minutes after the car is turned off )
On (Enable)
10