Using The Control For Hdmi Function For "Bravia" Sync - Sony HT-RT5 Operating Instructions Manual

Using the Control for HDMI
Function for "BRAVIA"
Sync
This function is available on TVs with the
"BRAVIA" Sync function.
Operation is simplified with the features
below by connecting via an HDMI cable
products manufactured by Sony that are
compatible with the Control for HDMI
function.
You can enable the Control for HDMI
function by setting [Control for HDMI] to
[On] (page 27).
Notes
• To use the "BRAVIA" Sync function, be sure
to turn on the system and all connected
devices after making the HDMI connection.
• Depending on the settings of the
connected device, the Control for HDMI
function may not work correctly. Refer to
the operating instructions of the device.
System Power Off
When you turn off the TV, the system and
the connected device will turn off
automatically.
Notes
• The system does not turn off automatically
while playing music on this system.
• The interlocking function of system power
off may activate with devices of other
companies, but it is not guaranteed to
operate.
One-Touch Play
When you play content on a device (Blu-
ray Disc Player, "PlayStation ® 4," etc.)
connected to the system with an HDMI
cable, the system and TV are turned on
automatically and the input of the system
is switched to the appropriate HDMI 1/2/3
input.
34
GB
Notes
• This feature may not operate with certain
devices.
• If you set [Standby Through] to [Auto] or
[On] (page 27), and then play back the
content on a connected device when the
system is in standby mode, sound and
image can only be output from the TV while
the system remains in standby mode.
• The One-Touch Play function may activate
with devices of other companies, but it is
not guaranteed to operate.
System Audio Control
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the system
automatically.
The volume of the system will be adjusted
when you adjust the volume using the
TV's remote control.
If the TV sound was output from the
speakers of the system the last time you
watched the TV, the system will be turned
on automatically when you turn on the TV
again.
You can also enjoy this feature when
using the Twin Picture function (Picture
and Picture (P&P)) on your TV.
• If the [TV], [HDMI1], [HDMI2] or [HDMI3]
input is selected, the sound can be
output from the system.
• If other than [TV], [HDMI1], [HDMI2] or
[HDMI3] input is selected, the sound is
only output from the TV when using the
Twin Picture function. When you turn off
the Twin Picture function, the sound is
output from the system.
Notes
• Depending on the TV, the numbers that
indicate the volume is displayed on the TV
display. The displayed numbers on the TV
display may be different from the numbers
on the display window of the Bar Speaker.
• The system audio control function may
activate with devices of other companies,
but it is not guaranteed to operate.