Planet ICA-4500V User Manual page 62

Restore Setting
Firmware Upgrade
Make sure that the Firmware only applies to this device. Once updated, it will be
burned into FLASH ROM of system.
Warning!!!
The download firmware procedure cannot be interrupted. If the power and/or
network connection are broken during the download procedure, it might possibly cause
serious damage to the device.
Please be aware that you should not turn off the power during updating the firmware and wait
for "finish" message. Furthermore, do not try to upgrade new firmware if it's not necessary.
System Restart
5 Mega-Pixel 20M IR Vari-Focal Dome IP Camera
settings, if settings are changed and there is unexpected
behavior.
Click the "Browse" button to locate the saved backup file and
then click the "Restore Setting" button. The settings will be
restored to the previous configuration.
The device supports new firmware upgrade.
1. Close all other application programs which are not
necessary for firmware update.
2. Make sure that only you access this device at this moment
3. Disable Motion Detection function.
4. Select "Firmware name"
5. Select the Firmware binary file.
6. Once the firmware file is selected, select "Upgrade".
7. The upgrade progress information will be displayed on the
screen.
8. A message will be shown while the firmware is upgraded.
Once the upgrading process completed, the device will
reboot the system automatically.
9. Please wait for 80 seconds, and then you can use PLANET
IPWizard II to search the device again.
The device is restarted without changing any of the settings.
62
ICA-4500V