Ikelite DSC-RX100M3/B Instruction Manual page 28

Problem
Water enters the
housing
Pictures are too blue
or too green
28
Solution
- Remove, clean and properly lubricate the main
o-ring.
- Look for hair, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and immerse in water.
- Return housing to Ikelite for evaluation.
- Use custom (manual) white balance. Reset for
each working depth or when attaching a
color correcting filter to the camera lens.
- Add an external strobe.
- Move in closer to your subject when taking a
picture.
- Add an optional color correcting filter to the
Housing Port.