Table of Contents
Advertisement
Attach Optional Tray + Dual Handles to Housing
Attaching an optional Tray + Dual Handles will
add stability and gripping point(s) for
comfortable use of the housing. Add a second
strobe to eliminate shadows and evenly light
your subjects.
Attach Optional Tray with Release Handle(s) to Housing
1. Place the housing upside
down on a flat surface or in
your lap so that the housing
port is facing toward you as
shown.
2. Line up the 3/8" tray holes
with the housing mounts. If
the tray is positioned
properly, the handle will be
on your left side facing down.
3. Place a shoulder washer in
each 3/8" tray hole with the
small end of the washer facing down.
4. With your free hand, insert and rotate the 12-24 x 1/2" screws clockwise
until threaded into the housing mounts. Finish tightening the tray to the
housing using a flathead screwdriver. Do not overtighten.
17
Advertisement
Table of Contents
