Maintenance - Kipor ID6000 Operation Manual

8. MAINTENANCE

The purpose of the maintenance and adjustment schedule is to keep the generator in
the best operating condition.
Shut off the engine before performing any maintenance. If
WARNING
the engine must be run, make sure the area is well ventilated.
The exhaust contains poisonous carbon monoxide gas.
Use genuine our parts or their equivalent. The use of
CAUTION
replacement parts which are not of equivalent qual-ity may
damage the generator.
Maintenance Schedule
Item
Regular service period
Each
use
Check
Oil
Replace
Oil filter Check and replace
Check
Air filter
Clean
Nozzle pump Clean adjust
Valve clearance Check adjust
Tank and filter Clean or replace
Every 2 years(replace if necessary)(3)
Oil circuit Check
NOTE: (1) "O" means normal maintenance interval
(2) "O(2)" means generator used in dirty area. Please shorten the maintenance interval
(3) "O(3)" means maintenance and repair should taken by KIPOR dealer unless
professionals are available. Please refer to the maintenance manual.
1. CHANGING OIL
Run generator for 3 5 minutes and stop it. Drain the oil quickly when the generator is
heated.
Ensure the generator is stopped before drainage.
WARNING
First Every 3 Every 6 Every
month months months year
or or or 100 or 200
20 hours 50 hours hours hours
af t e r second t i m e af t e r second t i m e
first time
( ) ( ) (
( Replace
(2)
(3)
(3)
- -
5. STARTING THE GENERATOR
1. Before starting the genset, disconnect the load from the DC terminals.
Ensure the breaker is kept at "OFF"
2.
Turn the switch to the start position, then generator begins to preheat automatically.
)
Loose it after all lamps lit, the switch returns to "ON", which means generator starts
)
successfully. For start failure, please restart the generator after waiting for 10 minutes.
Breaker
- -