Advertisement
1
Plug in
Plug the mains power adapter into the Ethernet switch. Plug the other
end of the adapter into the wall power socket and switch on.
You'll need an ethernet cable for each device you want to connect to the switch.
For best performance it's recommended you use a cable that supports gigabit
ethernet such as a CAT5e 4 pair cable.
5
2
2
Connect to router
Connect any port on the switch to an Ethernet port on your broadband
router/hub. Use the GigE port if your router has one (it's port 4 if you
have a BT Hub 3 or Hub 4).
The corresponding port light will turn on.
3
Connect your devices
Connect your device to any port on the switch. The corresponding port
light on the switch will light up for each connected device.
4
3
2
1
Power
3
1
Advertisement
