Table of Contents
Advertisement
Basic Call Features
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press
2. Enter the number, and then press the Send soft key.
Note:
During a call, you can alternate between the headset, hands-free speakerphone and handset modes by pressing
the Headset key, the Speakerphone key or by picking up the handset. Headset mode requires a connected headset.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
.
Using the headset:
Press
.
Note:
You can reject an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the End Call soft key.
Using the speakerphone:
Press
or the End Call soft key.
Using the headset:
Press the End Call soft key.
Redial
Press
to enter the placed call list, press
Send soft key.
Press
twice when the phone is idle to dial out the last dialed number.
Call Mute and Un-mute
Press
to mute the microphone during a call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only one call on hold, press the Resume soft key.
.
to activate the headset mode.
or
to select the desired entry, and then press
or the
4
Advertisement
Table of Contents
