Installing the Battery
1.
Insert the battery into its place on the computer.
2.
Connect the battery cable to its connector on the system board.
3.
Fix the adhesive tape to secure the battery cable.
4.
Tighten the screws to secure the battery to the computer.
5.
Install the
base
cover.
6.
Follow the procedures in
Removing the Audio Board
1.
Follow the procedures in
2.
Remove the:
a.
base cover
b.
battery
3.
Perform the following steps:
a. Disconnect the audio-board cable from its connector on the system board [1].
b. Remove the screw that secures the audio board to the computer [2].
c. Remove the audio board from the computer [3].
10
After Working Inside Your
Before Working Inside Your
Computer.
Computer.