Write To Buffer Memory - LG K4F-PIDA User Manual

Chapter 5. DEDICATED INSTRUCTIONS FOR SPECIAL MODULES

5.2 Write to Buffer Memory

<Format>
Format
n1 The slot No. where a special module is mounted.
Head address of the special module buffer memories to which the
n2
data will be written..
Head address of the device where the data to be written has been
D
stored, or an integer
n3 Number of data to be written.
PUT: always executed if the execution condition turns on. (
PUTP : executed if the execution condition is triggered. (
Example 1) In this example, the PID control module is mounted on the slot 6 in the base unit and the data of
CPU module addresses D0 and D1 will be written to the buffer memory addresses D202 and D203.
(address) CPU module D area
D0
D1
D2
D3
D2
<PUT>
execution condition
execution condition
<PUTP>
PUT, PUTP
execution condition
for PUT
Descriptions
<The difference between PUT and PUTP>
Data 0
Data 1
PUT 00006 00000 D0000 00002
for PUT
for PUTP
M0000
PUTP 00006 00202 D0000 00002
PUT n1 n2 S
PID control module
buffer memory
Specify the enabled loop
Specify the enabled loop
D
5 - 2
n3
Available Data Type
Integer
Integer
M,P,K,L,T,C,D,#D
Integer
)
)
(address)
0
1
2
3
4
M0000