Table of Contents
Advertisement
Chapter 6. PROGRAMMING
Chapter 6. PROGRAMMING
6.1 Basic Programming
The following describes the method to set the running conditions in the buffer memories of the PID control
module.
The PID control module is already mounted on the slot 0.
The PID control module occupies 16 I/O points.
6.1.1 K7F-PIDA
10 - 1
SET data are processed with
triggering P21 whenever the
contents in the buffer memories
(addresses: 1,1,4,5,10~ 41 and
74 ~ 202) are changed.
Advertisement
Table of Contents
Troubleshooting
