Introduction; Description - Baxi Platinum Combi 24 HE Installation & Servicing Instructions Manual

Case Front Panel
Control Box
Fig. 1
6
Information
Label
Data Badge

1.0 Introduction

1.1

Description

1. The Baxi Platinum Combi HE is a fully automatic gas fired
wall mounted condensing combination boiler. It is room sealed
and fan assisted, and will serve central heating and mains fed
domestic hot water.
2. The boiler is set to give a maximum output of :-
24 models - 24 kW DHW
25.9 kW CH (Condensing)
28 models - 28 kW DHW
25.9 kW CH (Condensing)
33 models - 33 kW DHW
30.3 kW CH (Condensing)
3. It is designed for use on Natural Gas (G20).
4. The boiler is suitable for use only on fully pumped sealed
heating systems. Priority is given to domestic hot water.
5. The boiler is supplied with a filling loop and integral timer.
6. The boiler data badge gives details of the model, serial
number and Gas Council number and is situated on the inner
door panel. It is visible when the case front panel is removed
(Fig. 1).
7. The boiler model name and serial number are also shown
on the information label on the iner face of the right hand
case panel. This is for user reference.
8. The boiler is intended to be installed in residential /
commercial / light industrial E.M.C. environments on a
governed meter supply only.
9. The boiler must be installed with one of the purpose
designed flues such as the standard horizontal flue kit, part no.
5111073.
10. All systems must be thoroughly flushed and treated with
inhibitor (see section 6.2).
1.2 Optional Extras
Various flue extensions, bends, vertical flue kits, control
accessories etc. are available as optional extras. These are
detailed in a separate publication.
NOTE: All illustrations show the Platinum Combi 24 HE
unless otherwise stated.