Advantech EKI-1361 User Manual page 54

 Mode
User can set EKI as Client mode to connect EKI device to a wireless access
point or set EKI as Ad-hoc mode to connect with other wireless device directly
without wireless access point.
 Site survey
User can use this function to discovery the wirelees access point near EKI
device. Sometimes, due to the wireless access point setting and environment
issue, the specific wireless access point may not be listed in the result. User can
try to refresh the list several times.
 SSID
When using Client mode, user can specify the SSID that EKI device should con-
nect to; When using Ad-hoc mode, user can specify the SSID and channel that
forms a ad-hoc network.
EKI-1361/EKI-1362 User Manual 46