Operation; Patch Selecting - Mooer BEM BoX Owner's Manual

01
Power On
Plug the cable of AC Adapter
(9V, 300mA, center minus) into
the [DC 9V] Jack, when using
batteries, plug the bass cable
into this jack will turn the device
on.
Pressing [PATCH +] footswitch time and again (or holding [PATCH +]
footswitch) cycles through patches in the order
~ , . Pressing or holding [PATCH –] footswitch will switch
patches in the opposite order.
Adjusting the master volume
03
Set the Module Selector to [PLAY],
rotate [VALUE] knob to adjust the
master volume of BEM Box (when
setting up the master volume, LED
display will show the current level).
The range of master volume is
70 is the default value.

Operation

Patch Selecting

02 Selecting Patches
Set the Module Selector to [PLAY],
the LED display will show the
information of bank and patch
number, step on [PATCH +/-]
footswitch to change patches (Hold
one footswitch to switch patches
quickly).
08
~
~ ,
... ~ , ~ ...