ZyAIR G-5100 User's Guide
Figure 41 VLAN
The following table describes the labels in this screen.
Table 25 VLAN
LABEL
Enable VLAN Tagging Select this check box to turn on VLAN tagging.
Management VLAN ID Enter a number from 1 to 4094 to define this VLAN group. Your management
Apply
Reset
90
DESCRIPTION
Use the Wireless screen to set the VLAN ID tag that the ZyAIR adds to the
Ethernet frames that a WLAN adapter receives from wireless clients or APs.
computer must belong to this VLAN group in order to manage the ZyAIR. This
can be done in the following ways:
•
The management computer could be a wireless client of the ZyAIR if the
ZyAIR's WLAN adapter is set to add the add the management VLAN ID
tag to Ethernet frames received from wireless clients.
•
The management computer could be on the wired network, behind a
VLAN-aware switch that is configured to add the management VLAN ID
tag to Ethernet frames from the computer before sending them to ZyAIR.
Note: Mail and FTP servers must have the same management
VLAN ID to communicate with the ZyAIR.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
Chapter 7 VLAN