Auxiliary access slot [S10V/S14V]
The S14V & S10V
features
on the back of the chassis, which is designed to fit
all expansion brackets that are supplied with other OrigenAE products. To install, the bracket
must first be unscrewed from the PCB & re-attached 'back-to-front' before fixing to the
auxiliary slot. This access point could also aid any custom expansion, where external
connectivity with a component or the M/B is required.
Separate the PCB
from the OrigenAE expansion bracket.
Flip the bracket 180 degrees and re-fit
it 'back-to-front'.
an auxiliary access slot
Micro ATX standoffs [S16V]
If a micro ATX motherboard
is to be installed in the S16V,
the
spacer bolts supplied
must be used. Screw the
bolts into the two shorter
standoffs as indicated.
Spacer bolts MUST NOT
BE INSTALLED when a full
ATX motherboard is used
as damage could occur.
11