Table of Contents
Advertisement
Auxiliary access slot [S10V/S14V]
The S14V & S10V
features
on the back of the chassis, which is designed to fit
all expansion brackets that are supplied with other
OrigenAE products. To install, the bracket must first be
unscrewed from the PCB & re-attached 'back-to-front'
before fixing to the auxiliary slot. This access point
could also aid any custom expansion, where external
connectivity with a component or the M/B is required.
Separate the PCB
from the OrigenAE
expansion bracket.
Flip the bracket 180
degrees and re-fit
it 'back-to-front'.
an auxiliary access slot
IR Blaster installation [S10V/S14V]
Both the S10V & S14V have an
IR blaster fixing point on the
rear of the chassis, for when the
optional Philips IR solution is used.
This allows for more flexibility
when spare expansion slots are
not available. Unscrew the blaster
PCB from the expansion bracket
and re-install as shown.
Micro ATX standoffs [S16V]
If a micro ATX motherboard
is to be installed in the S16V,
the
spacer bolts supplied
must be used. Screw the
bolts into the two shorter
standoffs as indicated.
Spacer bolts MUST NOT
BE INSTALLED when a full
ATX motherboard is used
as damage could occur.
11
Hide quick links:
Advertisement
Table of Contents
