Advertisement
Advertisement
Table of Contents
Related Manuals for Origen ae S8
Summary of Contents for Origen ae S8
- Page 1 user guide Origen...
- Page 2 user guide Thank you for purchasing this Origen htpc enclosure. We recommend that you read this user guide thoroughly before installation. Origen has rapidly grown to be one of the worlds leading HTPC enclosure manufacturers since its inception in 2000. We were one of the first companies with the vision to produce high end htpc enclosures that harmonise with mainstream audio visual equipment, allowing the pc to leave the office and fit effortlessly into the living room environment.
-
Page 3: Table Of Contents
S8 overview Opening the case ODD cage removal Optical disk drive installation Metal sticker fitting instructions Optical drive bezel installation HDD cage removal Hard drive installation USB 3.0 ports connection Max height CPU cooler IR310 cable reference diagram Installing IR Software... -
Page 4: S8 Overview
S8 overview These are the main features and controls of the S8 htpc enclosure. Power button Power LED ring IR receiver window Top panel Optical disk drive vezel USB 3.0 ports ODD eject button Optical disk drive brackets IR310 IR controller fixing point... -
Page 5: Opening The Case
Opening the case Remove the thumb screws as indicated. Carefully raise the p anel as shown (about 30mm is enough) pull out to remove. Reverse the procedure to replace. DO NOT force upwards as this could cause damage to the top panel. ODD cage removal Remove left / right 4 fixing screws completely from the chassis. -
Page 6: Metal Sticker Fitting Instructions
Metal sticker fitting instructions The drive format icon should also be fitted to the bezel before installation. The metal sticker sheet supplied has Blu-ray, HD-DVD or DVD icons, depending on the format being used. Ensure the bezel is free from dirt of grease. Peel and fold back the yellow backing sheet, revealing only the part you wish to use. -
Page 7: Hdd Cage Removal
* The specification of ODD bracket and HDD bracket is same. USB 3.0 connection The S8 is allowed to use two USB 3.0 port by connecting to mainboard as shown. Refer to your mainboard user guide if the mainboard supports USB 3.0 socket. -
Page 8: Ir310 Cable Reference Diagram
IR310 cable reference diagram This is IR310 module and cable connection. Ensure all cables connection as diagram. Contact sales@origenae.com for special purchase of Ir310. *Remind that wrong cable connection might be damaged to your PC components. Check/ensure cable connection correctly as below. To Motherboard Power on/off Header From Chassis Power Switch Part list... -
Page 9: Installing Ir Software
Installing ir software Download the IR310 installation software from our web-site. www.origenae.com Read this notice before installation. - The USB (S-IUSB-C2) cable must be connected to USB header pins. (See page 8) - The 5V standby cable (S-ATXS-C1) cable must be connected. - Page 10 Origen Global HQ #209 Baeksan B/D 763-2 Hengsin-Dong Dukyang-Gu Goyang City Gyounggi-Do 412-220 South Korea Website www.origen .com...
Need help?
Do you have a question about the S8 and is the answer not in the manual?
Questions and answers