To delete pad settings
1.
Enter the CLEAR mode.
2.
Press the PAD selector button.
3.
Press the pad you want to delete.
This deletes the settings of the pad and returns it to its
initial settings.
Copying Data
Use the procedures in this section to copy a pattern or
bank. You can also copy pad setting contents.
To copy pattern contents
1.
Enter the COPY mode.
2.
Press the PATTERN selector button.
3.
While holding down the sequence step key
that corresponds to the pattern number of the
copy source, press the sequence step key
that corresponds to the copy destination.
This copies the sequence to the destination pattern.
1.
2.
3.
1.
2.
Initialized pad: Lit
3.
Mastering TRACKFORMER Operations
To copy bank contents
Enter the COPY mode.
Press the PADSET selector button.
While holding down the sequence step key
that corresponds to the bank number of the
copy source, press the sequence step key
that corresponds to the copy destination.
This copies the sequence to the destination bank.
To copy pad settings
Enter the COPY mode.
Press the PAD selector button.
While holding down the pad whose settings
you want to copy, press the copy destination
pad.
This copies tone and other settings to the destination
pad.
EN-11