Adjusting Pad Sensitivity - Casio XW-PD1 Trackformer User Manual

Adjusting Pad Sensitivity

Use the procedure below to adjust the sensitivity of a
pad whenever you feel its velocity is different from
that of other pads when tapped. Change to a smaller
sensitivity value when the velocity of the pad is greater
than that of other pads. Change to a larger sensitivity
value when pad velocity is less than that of other pads.
• Settings: –99 to 0 to +99
1.
While holding down sequence step key 16,
press the P (power) button to turn on power.
2.
Press sequence step key 2.
3.
Tap the pad you want to adjust.
This will sound a drum sound and momentarily
display the current velocity value. Next, the sensitivity
value of the tapped pad will appear.
4.
Use the VALUE knob to adjust the pad's
sensitivity value.
5.
Repeat steps 3 and 4 to adjust the sensitivity
of other pads.
6.
After adjustment of all the pads is the way
you want, press the PLAY selector button.
The message (End) shown below will appear on the
display when adjustment is complete.
7.
Press the P (power) button to turn off
TRACKFORMER.
NOTE
• To cancel adjustment part way through, press the
EXIT button. Canceling adjustment part way
through discards any adjustment you made up to
that point.
Adjusting Controller Operations
EN-21