Advertisement
Introduce the coaxial cable in the special
slot (A) and lead it out of rear bottom side
of Motosat (B)
Verify that the
coaxial cable
does not
obstruct the
screw hole.
Brown
White
5
Engage Motosat in the antenna support
tube until the tube holes are aligned with
the Motosat holes.
Fix Motosat to the antenna support tube
with the special screws.
Cut the antenna cable to the proper length and
apply the connector as shown on Figure. Make
sure no wire of the braiding touches the core of
the cable
Coax
Green
Receiver Sat
Connect the cables as
shown in figure
Advertisement
