Info [Channel Number]; Getaccess <Channel Number> [Userid]; Setaccess <Channel Number> <Userid>[Callin=On|Off] [Ipmi=On|Off] [Link=On|Off] [Privilege=Level]; Getciphers <All | Supported> <Ipmi | Sol> [Channel] - Raritan Dominion Px User Manual

Appendix E: Using the IPMI Tool Set

info [channel number]

Displays information about the selected channel. If no channel is given it
displays information about the currently used channel:
Example
$ ipmitool -I lan -H 192.168.51.58 -U admin -a channel
info
getaccess <channel number> [userid]
Configures the given userid as the default on the given channel number.
When the given channel is subsequently used, the user is identified
implicitly by the given userid.
Example
$ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P
raritan1 channel getaccess 14 63
setaccess <channel number> <userid>[callin=on|off] [ipmi=on|off]
[link=on|off] [privilege=level]
Configures user access information on the given channel for the given
userid.
Example
$ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P
raritan1 channel setaccess 14 63 privilege=5
getciphers <all | supported> <ipmi | sol> [channel]
Displays the list of cipher suites supported for the given application (ipmi
or sol) on the given channel.
Example
$ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P
raritan1 channel getciphers ipmi 14

Event Commands

The Event commands allow you to send pre-defined events to a
Management Controller.
231