Table of Contents
Advertisement
Release Notes for Software Version 1.08
Changes and Additions in the System Configuration Management
Program (cont'd)
Changing Ranges of Mailboxes in the Numbering Plan (cont'd)
24
9.
When finished, press Q and then press <Enter>.
10. At the System Configuration Main Menu, press Q then <Enter>.
11. At the DOS prompt, type VM and press <Enter> to start up the
Voice Mail.
12. Logon to a System Administrator's Mailbox, and re-initialize the
Voice Mail Database.
For instructions, see the NVM-2 Programming Guide, Chapter 5.
Example: A sample Mailbox Range Table is shown below
Mailbox Ranges for XX
----------------------------------------------------------------------
Seq. Starting Mailbox Mailbox
#
Mailbox # Count
----------------------------------------------------------------------
1 ... 10
... 6
... Extension
2 ... 20
... 6
... Extension
3 ... 30
... 6
... Extension
4 ... 71
... 2
... Trunk
5 ...
... 0
... Undef
6 ...
... 0
... Undef
7 ...
... 0
... Undef
8 ...
... 0
... Undef
9 ...
... 0
... Undef
10 ...
... 0
... Undef
----------------------------------------------------------------------
P ... Print/display the mailbox range table
E ... Edit a mailbox range by sequence #
C ... Clear a mailbox range by sequence #
Q ... Quit and return to main menu
Explanation:
In this example, the Mailbox/Extension Range consists of 4 sequences.
Each sequence is numbered consecutively and contains the following
entries:
•
Sequence 1 (10 through 15)
A 10 is entered for the Starting Mailbox #. Since there are a total
of 6 mailboxes in this sequence, a 6 is entered for the Mailbox
Count. Because they are all Subscriber Mailboxes, the entry is
Extension for the Mailbox Type.
•
Sequence 2 (20 through 25)
A 20 is entered as the Starting Mailbox #. Since there are a total
of 6 mailboxes in this sequence, a 6 is entered for the Mailbox
Count. Because they are all Subscriber Mailboxes, the entry is
Extension for the Mailbox Type.
•
Sequence 3 (30 through 35)
A 30 is entered for the Starting Mailbox #. Since there are a total
of 6 mailboxes in this sequence, a 6 is entered for the Mailbox
Count. Because they are all Subscriber Mailboxes, the entry is
Extension for the Mailbox Type.
•
Sequence 4 (71 and 72)
A 71 is entered for the Starting Mailbox #. Since there are only
two mailboxes in this sequence, a 2 is entered for the Mailbox
Count. Because they are both Trunk Mailboxes, the entry is
Trunk for the Mailbox Type.
Type
Issue 1-0
Advertisement
Table of Contents
