Miele H 6200 BM Operating And Installation Instructions page 101

Problem
A function has been
selected and the time of
day and the 0 symbol
are still in the display.
The oven does not heat
up.
A function has been
selected but the oven is
not working.
i2:00 will appear in the
display with the triangle
V flashing under +.
0:00 appears
unexpectedly in the
display and T is
flashing at the same
time. The buzzer might
also be sounding.
F xx appears in the
display.
Possible cause and remedy
The system lock 0 has been switched on.
^ Switch off the system lock (see "System lock 0").
Demo mode has been activated. MES_ appears in the
display.
The oven can be operated but does not heat up.
^ Deactivate demo mode (see "Settings – P 8").
There has been a power cut which has caused a
current process to stop.
^ Turn the function selector to the ß position and switch
the oven off.
Start the cooking process again.
The power supply was interrupted for longer than 200
hours.
^ Reset the time of day (see "Using for the first time").
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Turn the function selector to ß. The oven is now ready
to use again immediately.
There is a problem that you cannot resolve.
^ Call the Miele Service Department.
Problem solving guide
101