Advertisement
Quick Links
Also check for fi rewalls or routers blocking outgoing
communications. If this is the case, please allow (or request
your IT department to allow) the following outgoing address
on your fi rewall: fl exclock.payrollservers.us port. The
FlexClock makes outbound TCP connections on port 8289,
and does not need to accept any inbound connections.
Please note that if you try to access this address with a web
browser, no page will be displayed and you may receive an
error message from your web browser. This is normal.
DNS Error
This message can have multiple causes, but often results
from mistakes when entering manual IP address parameters,
or from problems with your Internet connection.
Specifi cally, it means that the clock could not use your
Internet connection to look up "fl exclock.payrollservers.us".
Frozen Screen
Press the number seven (7) on the keyboard of the FlexClock
or disconnect and reconnect the power to restart it. (This
won't erase any punch information.)
Already Sending
There is an ongoing connection between the server and the
FlexClock, please allow it to fi nish. If this message continues
for a period longer than 10 minutes restart the FlexClock by
pressing the seven (7) key on the keyboard.
Also check for fi rewalls or routers blocking outgoing
communications. If this is the case, please allow (or request
your IT department to allow) the following outgoing address
on your fi rewall: fl exclock.payrollservers.us port. The
FlexClock makes outbound TCP connections on port 8289,
and does not need to accept any inbound connections.
Please note that if you try to access this address with a web
browser, no page will be displayed and you may receive an
error message from your web browser. This is normal.
DNS Error
This message can have multiple causes, but often results
from mistakes when entering manual IP address parameters,
or from problems with your Internet connection.
Specifi cally, it means that the clock could not use your
Internet connection to look up "fl exclock.payrollservers.us".
Frozen Screen
Press the number seven (7) on the keyboard of the FlexClock
or disconnect and reconnect the power to restart it. (This
won't erase any punch information.)
Already Sending
There is an ongoing connection between the server and
the FlexClock, please allow it to fi nish. If this continues for
a period longer than 10 minutes restart the FlexClock by
pressing the seven (7) key on the keyboard.
FlexClock
Multi-Purpose Time Device
Setup Guide
FlexClock
Multi-Purpose Time Device
Setup Guide
Advertisement
Related Manuals for VeriFone FlexClock
Summary of Contents for VeriFone FlexClock
- Page 1 Already Sending There is an ongoing connection between the server and the FlexClock, please allow it to fi nish. If this continues for a period longer than 10 minutes restart the FlexClock by pressing the seven (7) key on the keyboard.
- Page 2 To use the FlexClock, simply connect the Ethernet cable to not been entered into the online timekeeping system. the FlexClock using the port on the back that has no icon a. The serial number entered may be incorrect, or no above it, and then to your Internet router.
- Page 3 3. Press the Enter key (Green key) Initial Confi guration You will see this screen: The fi rst time the FlexClock is started, it needs to be PRINT RECEIPT confi gured to send and receive information via Ethernet UPON PUNCH (Internet).
- Page 4 Punch Receipts services do NOT require these settings to be manually The FlexClock is able to print receipts when employees entered, and 0.0.0.0 for all of these settings is usually the punch in and out. The receipt feature setting is set to OFF by...
Need help?
Do you have a question about the FlexClock and is the answer not in the manual?
Questions and answers