Broadcast Setup With Smpte Fiber Bridge - Red Epic 4K Broadcast Module Operation Manual

R E D 4 K B R O A D C A S T M O D U L E O P E R AT I O N G U I D E

BROADCAST SETUP WITH SMPTE FIBER BRIDGE

This section describes example setups and workflows for using the 4K Broadcast Module in configurations that
incorporate a SMPTE fiber bridge and a fiber adaptor. Example configurations include:
 Handheld/EFP (electronic field production) broadcast setup
 Fixed/studio broadcast setup
HANDHELD/EFP SETUP: RECOMMENDED EQUIPMENT
 4K Broadcast Module (required)
 +1 Adaptor Module or Module Adaptor (required)
 Four (4) 3G/HD-SDI cables (required)
 RED WIRELESS MoToR DRIVER (W.M.D.)
 Iris motor
 Cinema zoom lens with servo drive unit and power cable
 Iris rods and rod mount
 RED Touch 7.0" LCD
 RED BoMB EVF
 Tally light
 Shoulder pad
 Fiber adaptor (required)
 Fiber adaptor base station (required)
 311M SMPTE hybrid fiber cable (required)
 Ethernet cable (required for camera control)
 Remote camera panel (RCP) system (required for camera control)
FIXED/STUDIO SETUP: RECOMMENDED EQUIPMENT
 4K Broadcast Module (required)
 +1 Adaptor Module or Module Adaptor (required)
 Four (4) 3G/HD-SDI cables (required)
 RED WIRELESS MoToR DRIVER (W.M.D.)
 Lens motors
 Zoom and focus demands
 Display viewfinder
 Headset intercom
 Sled
 Tripod
 Fiber adaptor (required)
 Fiber adaptor base station (required)
 311M SMPTE hybrid fiber cable (required)
 Ethernet cable (required for camera control)
 Remote camera panel (RCP) system (required for camera control)
COPYRIGHT © 2015 RED.COM, INC 955-0072, REV-E | 26