Output 4K Quad 3G/Hd-Sdi - Red Epic 4K Broadcast Module Operation Manual

R E D 4 K B R O A D C A S T M O D U L E O P E R AT I O N G U I D E

OUTPUT 4K QUAD 3G/HD-SDI

REQUIRED ITEMS
 DSMC BRAIN
 Adaptor module (either a +1 Adaptor Module or a Module Adaptor)
 4K Broadcast Module
 Four (4) 3G/HD-SDI cables
 Quad 3G/HD-SDI device
SET UP 4K QUAD 3G/HD-SDI
1. Ensure that the BRAIN is off.
2. Install the 4K Broadcast Module on the BRAIN. For more information, go to
Module" on page 10.
3. Use four (4) 3G/HD-SDI cables to connect the four (4) SDI-OUT ports on the 4K Broadcast Module to the
four (4) 3G/HD-SDI IN ports on a quad 3G/HD-SDI device.
NOTE: Be careful to connect each cable from the 4K Broadcast Module to the appropriate connector on the
device. For example, connect SDI-OUT 1 on the 4K Broadcast Module (top left quadrant) to 3G/HD-SDI IN
1 on the device.
4. Turn on the BRAIN.
5. Select the frame rate:
A. Go to Menu > Settings > Project > Frame Rates.
B. Select a matching Sensor Frame Rate and Project Time Base.
COPYRIGHT © 2015 RED.COM, INC
"Install the 4K Broadcast
955-0072, REV-E | 12