Chapter 4: 4K Broadcast Module Maintenance; Clean 4K Broadcast Module Exterior Surfaces; Store 4K Broadcast Module; Water Damage - Red Epic 4K Broadcast Module Operation Manual

Table of Contents

R E D 4 K B R O A D C A S T M O D U L E O P E R AT I O N G U I D E

4K BROADCAST MODUlE

MAINTENANCE

All RED products are designed for rugged durability, but precision instruments demand proper care. Follow the

instructions in this chapter to clean, maintain, and store the 4K Broadcast Module.

WARNING: DO NOT rinse or immerse the 4K Broadcast Module in water. Keep dry at all times.

WARNING: DO NOT use soaps, detergents, ammonia, acetone, alkaline cleaners, abrasive cleaning compounds,

or solvents. These substances may damage lens coatings and electronic circuitry.

WARNING: DO NOT attempt to modify, dismantle, or open your 4K Broadcast Module as doing so may expose

you to electric shock and serious injury. There are no user-serviceable parts inside. Alteration or repairs made

to the 4K Broadcast Module, except by a RED authorized service facility, voids all warranties.

Use a gas duster to clean around the recesses on the exterior of the 4K Broadcast Module.

Clean with a damp, lint-free cloth. When cleaning your 4K Broadcast Module, remember that the device is

not waterproof and moisture can damage electronic circuitry.

WARNING: DO NOT store the 4K Broadcast Module in any place with extreme temperatures, direct sunlight, high

humidity, severe vibration, or strong magnetic fields.

If your device has come in contact with water or you suspect water damage, contact your Bomb Squad

representative immediately.

WARNING: DO NOT attempt to power any device that may have water damage.

WARNING: DO NOT place the device in a container of rice, silica gel, or desiccant packets in an attempt to dry

the device.

955-0072, REV-E |

Table of Contents