Table of Contents
Advertisement
R E D 4 K B R O A D C A S T M O D U L E O P E R AT I O N G U I D E
C
4K BRoADCAST MoDuLE
WoRKFLoW
This section describes the basic setup and workflow for using the 4K Broadcast Module in different environments.
For more information about different setup and integration options, go to www.red.com/products/4k-broadcast.
ESSENTIAL (BASIC) BROADCAST SETUP
This section describes an example setup and workflow for connecting the 4K Broadcast Module directly to a
monitor.
ESSENTIAL (BASIC) SETUP: RECOMMENDED EQUIPMENT
4K Broadcast Module (required)
+1 Adaptor Module or Module Adaptor (required)
Four (4) 3G/HD-SDI cables (required)
4K recorder
Monitor (required for playback)
RED Touch 7.0" LCD
DSMC Tactical Top Plate 2.0
ESSENTIAL (BASIC) INSTALLATION
The example installation below describes how to record to an external 4K recorder while viewing the live image
on a monitor. If your setup does not require using either an external 4K recorder or a monitor, skip the steps
related to the device.
1. Set up the camera:
A. Set up the camera rig.
B. Install the 4K Broadcast Module on the BRAIN. For more information, go to
Module" on page
2. Connect all four (4) SDI-OUT ports on the 4K Broadcast Module to four (4) 3G/HD-SDI IN ports on a 4K
recorder using four (4) 3G/HD-SDI cables.
3. Connect the 4K recorder to a monitor.
NOTE: This setup may require a signal converter. Check the input/output connectors on your devices to
determine what cables and convertors are necessary.
COPYRIGHT © 2015 RED.COM, INC
10.
"Install the 4K Broadcast
955-0072, REV-E |
25
Advertisement
Table of Contents
