Remove The 4K Broadcast Module - Red Epic 4K Broadcast Module Operation Manual

R E D 4 K B R O A D C A S T M O D U L E O P E R AT I O N G U I D E
5. Apply pressure and use a T20 Torx driver to turn the lock on the bottom of the adaptor module clockwise
into the Lock position.
The 4K Broadcast Module is secured.

REMOVE THE 4K BROADCAST MODULE

REQUIRED TOOL: T20 Torx
1. Turn off the BRAIN.
2. Use a T20 Torx driver to turn the lock on the adaptor module counter-clockwise to the Unlock position.
3. Rotate the 4K Broadcast Module upwards and down to disengage the lip at the top of the module from the
adaptor module.
4. Remove the 4K Broadcast Module from the adaptor module.
COPYRIGHT © 2015 RED.COM, INC
driver
®
Lock In Module
4K Broadcast Module
Installed
955-0072, REV-E | 11