Chapter 3: Install And Connect The Module; Install The 4K Broadcast Module - Red Epic 4K Broadcast Module Operation Manual

R E D 4 K B R O A D C A S T M O D U L E O P E R AT I O N G U I D E
03
INSTALL AND CONNECT
THE MODULE

INSTALL THE 4K BROADCAST MODULE

REQUIRED TOOL: T20 Torx
1. Turn off the BRAIN.
2. Install a +1 Adaptor Module or a Module Adaptor. For more information about how to install adaptor
modules, see the DSMC Operation
3. Insert the lip at the top of the 4K Broadcast Module into the recess at the top of the adaptor module.
4. Rotate the 4K Broadcast Module down flush with the rear of the adaptor module.
COPYRIGHT © 2015 RED.COM, INC
driver
®
Guide, available at www.red.com/downloads.
Insert Module Lip
955-0072, REV-E | 10