Device Emulator; Software Required - Casio DT-X8 Series Quick Start Manual

7. Device Emulator

The Device Emulator provides application developers with an environment that, without having
the actual terminal available, allows them to debug basic functions and performance of an
application at source level by stepping through the code.

7.1 Software Required

The Device Emulator requires the software(s) listed below before installing the emulator.
ActiveSync 4.2 or a later version (If required)
http://www.microsoft.com/downloads/details.aspx?FamilyID=7269173a-28bf-4cac-a682-58d32
33efb4c&DisplayLang=en
Visual Studio 2008 or Visual Studio 2005 (Required)
CASIO DT-X8 BDK (Required)
Standalone Device Emulator 3.0 (Optional. See notes 1 and 2.)
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a6f6adaf-12e3-4
b2f-a394-356e2c2fb114
Notes:
1. To use Microsoft Device Emulator 3.0, follow the steps below.
Install DT-X8 ExportSDK and Device Emulator of the DT-X8 BDK.
Download Microsoft Device Emulator 3.0 and install it.
Edit the following file and save the changes made.
C:\Program Files\Windows CE Tools\wce600\DT-X8\Emulation\DT-X8.cdes
Before you change, the default parameter in the file is described as follows.
module=DevEmu500.exe
Change the parameter to the one below. Be sure to describe the whole parameter in single
one line.
module=C:\Program Files\Microsoft Device Emulator\1.0\
DeviceEmulator.exe
You can substitute the Device Emulator Version 3.0 released in Visual Studio 2008 for an
engine of Device Emulator included in the DT-X8 BDK by the mentioned procedure above.
45