Casio DT-X8 Series Quick Start Manual page 36

4. Click Detail tab.
Figure 5.26
Table 5.7
Field / Radio Buttons
WLAN configure,
Status display tool
Enable AdHoc network setting
Enable all authentication settings
Inifile comment
WLANConfig, - Use only CASIO provided WLAN tool.
NetSearch - Configure WLAN setting with settings
extracted from the ini file.
- Initiate NetSearch when tapping the icon in
the task tray.
WLANConfig, - Use both CASIO provided WLAN tool and
NetUI MS tool.
- Configure WLAN setting with settings
extracted from the ini file.
- Initiate NetUI (MS tool) when tapping the
icon in the task tray.
NetUI/NetUI - Use only the MS tool.
- Configure WLAN setting, not with settings
extracted from the ini file.
- Initiate NetUI when tapping the icon in the
task tray.
If this radio button is selected and the OK button
that appears in the subsequent popup warning
message is clicked, other settings in the ini file
will be deleted. Only the WLAN configuration
set with NetUI is saved.
With check mark : enable the setting.
Without check mark : disable the setting.
With check mark : enable the setting.
Without check mark : disable the setting.
Enter a comment of up to 100 characters to be
written in the ini file.
36
Description Default
Yes
Yes
Yes
None