Usb Connection Via Windows Mobile Device Center - Casio DT-X8 Series Quick Start Manual

5.2 USB Connection via Windows Mobile Device Center

To establish connection via USB interface with PC runs in Windows Vista, use Windows Mobile
Device Center ("WMDC"). The DT-X8 with the factory-setting (default) does not support the
WMDC. Follow the procedure below to change the setting on the DT-X8.
Procedure
1. Close all applications running on the DT-X8.
Navigate to Settings
2.
Click Connect Utility tab.
3.
Figure 5.20
Choose Windows Mobile Device Center radio button and then click OK button.
4.
Figure 5.21
5. A dialo
Figure 5.22
6. The DT
7 . Mount the DT-X8 on the cradle, and then follow a message appeared in the WMDC on the PC.
Control Panel
gue asking your final confirmation appears. Click Y
-X8 starts up again.
USB Connection.
ES button.
31