Setting Up The Development Environment; Installing Cab Files - Casio DT-X8 Series Quick Start Manual

6. Setting Up the Development Environment

6.1 Installing CAB Files

1. After installing the library files, the CAB files in Table 6.1 will be installed in the folder
below.
Table 6.1
System Library
Laser Scanner Library
Bluetooth Library
Imager Library
JPEG library
FLINK library
NFC Library
Notes:
1. The library with "Yes" in "Preinstalled" column is preinstalled in the DT-X8 and in the
Device Emulator. Thus, it is not necessary to install it, unless it has been updated or
changed.
2. The CAB file, en_Flink.ARMV4I.CAB, in the table does not operate for the DT-X8. Use
the FlinkLib.dll installed by default in the terminal.
2. Copy all the CAB files in Table 6.1 to any folder on the DT-X8 via ActiveSync.
3. Carry out each CAB file.
4. When the installation starts, the installation status will appear.
C:\Program Files\CASIO\MBSYS\CAB
Library
en_SystemLib.ARMV4I.CAB
en_OBReadLib.ARMV4I.CAB
en_BluetoothLib.ARMV4I.CAB
en_ImagerLib.ARMV4I.CAB
enJPEG.ARMV4I.CAB
en_Flink.ARMV4I.CAB
en_NFCLib.ARMV4I.CAB
CAB file
43
Preinstalled
Yes
Yes
Yes
Yes
Yes
Yes (note 2)
Yes