Casio DT-X8 Series Quick Start Manual page 34

2. Click Basic tab. Set up each parameter in the tab by referring to the descriptions for the
parameters in Table 5.3.
Figure 5.24
Table 5.3
Parameter
SSID
Security Disable
WEP
WPA
Key
If EAP-PEAP radio button in Authentication field is selected, click the EAP-Properties button
that appears when selecting the EAP-PEAP radio button to set also the following parameters.
Table 5.4
Parameters in
EAP-Properties screen
User name
Password
Domain
Validate server
certificate
Enter the SSID of the network you want to connect to.
None.
Open in Authentication field.
PSK in Authentication field (if selected, the Key field must be set also.)
EAP-PEAP in Authentication field
EAP-TLS in Authentication field
Enter 26 (maximum) alphanumeric digits (13 hex pairs) in the Key field if 128 bit
radio button is selected. Or, enter 10 (maximum) alphanumeric digits (5 hex pairs) in
the Key field if 64 bit radio button is selected.
The field displays the number of characters that have been entered.
***** in the field implies that the key has been extracted from the ini file. If ***** in
the field is edited, a new key has been deemed to be set. Or, if it has never been edited,
the key extracted from the ini file becomes effective as is.
Description
Input a user name in alphanumeric (maximum 100
alphanumeric).
Input a password in alphanumeric (maximum 100
alphanumeric).
***** in the field implies that the password has been
extracted from the ini file. If ***** in the field is
edited, a new password has been deemed to be set.
Or, if it has never been edited, the password extracted
from the ini file becomes effective as is.
Input a domain in alphanumeric (maximum 100
alphanumeric).
Set up the requisition for server certificate.
With check mark : certificate is required.
Without check mark: certificate is not required.
34
Description
None
None
None
Certificate is not necessary
Default