Motorola MBP27T User Manual page 10

Motorola mbp27t; mbp27t/2; mbp27t/3; mbp27t/4 video baby monitor with touchless thermometer
Hide thumbs Also See for MBP27T:
Table of Contents

Advertisement

4. If there is not a connection or you are out of range, the video display will go
off, the symbol
every 9 seconds. (If the unit is on scan
Move the Parent Unit closer to the Baby Unit the link is re-established.
5. Press and hold the
scrolls fully across, to turn OFF the Parent Unit.
NOTE
The battery icon
seconds to indicate the battery is low and needs to be recharged. The battery
pack will take approximately 16 hours to charge.
When charging
1. If the Parent Unit is turned OFF, when the adapter is plugged in, it displays
a "power adapter" icon briefly, then a large battery icon with internal
segments cycling for 60 seconds, before the display goes blank. Note, the
unit continues to charge. The Blue LED at top left corner will light up to
indicate the adapter is plugged in.
2. If the Parent Unit is turned ON, when the adapter is plugged in, the battery
icon in the screen's top right corner will show that the battery is charging
by cycling the internal segments. The segments stop cycling when the
battery is fully charged. The Blue LED at top left corner will light up to
indicate the adapter is plugged in.
10
will flash on the LCD display, and the unit will beep
P
POWER ON/OFF button, until the progress bar
will turn RED, flash, and beep approximately every 5
1 ?
the
symbol displays.)
Getting Started

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbp27t/4Mbp27t/2Mbp27t/3

Table of Contents