The Air Cleaner - PGO PM-NAKED Service Manual

CLEANING THE AIR-CLEANER:
1. SCREW OUT THE SCREWS AND TAKE OFF THE
AIR-CLEANER COVER.
2. TAKE OUT THE SPONGE, AND CLEAN IT.
NOTE: USING SOLVENT TO CLEAN THE PONGE
ONLY. DO NOT USE FLAMMABLE &
EXPLOSIVE SOLVENT.
3. DRY OUT THE SOLVENT OF THE SPONGE BUT
AVOID DESTROYING IT.
4. REFILL FEW LUBRICANT OIL ON THE
SURFACE OF THE SPONGE (ONLY WET IT BUT
NOT DIP IT IN THE OIL).
5. PUT BACK THE SPONGE ON THE AIR
CLEANER
6.
AND PERFECTLY FASTEN THE COVER WITHOUT
ANY LEAKING.
7. ASSEMBLE THE AIR-CLEANER & PUT BACK
TO ITS ORIGINAL PLACE. PLEASE MAKE
SURE THAT THE SCREWS ARE FASTENED TO
AVOID CLEANER) GO INTO THE ENGINE.
PM* MODEL (PAPER ELEMENT)
~34~