System Setup
System Info
System Info displays the firmware version and date, along with tunerand model as show in Figure(39)
6. Installation
-24-
Figure (38)
Figure (39) System Infor
System Setup
Figure (40) Auto Scan Menu
Manual Scan
The Manual Scan Menu is shown in Figure (42). A scan can be performed,
be setting the following items: Country, Scan Type, Start Channel, Start Frequency, End Frequency, and Bandwidth. If the scan type
is single channel, then only the country and start channel can be set. If the scan type is channel range, then the country, start channel,
and end channel can be set. Use the <UP>, <DOWN> keys to select an item and the]<LEFT>, <RIGHT> keys to change the
settings.Once done, go to Start Scan and press <ENTER>.
Figure (42) Manual Scan Menu
Auto
-25-
Figure (41)