Chapter 1 Basic Remote Control Features - NPG DVD-T 901H Instruction Manual

Function DVB

Chapter 1 Basic Remote Control Features

1. POWER Software Power On/Off
Pressing <POWER> while the machine is off will turn on the machine, and
turn it off if it is already on.
2. VOL+/-
Pressing <VOL+> increases the volume, pressing <VOL->decreases the volume. A volume
barwill be displayed on the screen.
3. MUTE
Pressing <MUTE> will mute the audio, and display "Mute" on the screen. Pressing
mute again will unmute audio.
4. DVD/DVB System Mode
Switch between DVB and DVD operation. This button has no effect in the system is in DVD
modewhile reading disc type.
5. RETURN
Pressing<RETURN>from a setup me n u wi l l g o u p o n e level inthe menu. For DVB full-screen play
mode, pressing <RETURN> the channel will reture the last memory play.
6. UP/DOWN/LEFT/RIGHT
Used to navigate menus. When not in a menu, there are also DVB-specific Uses foreach
button.Pressing<UP>/<DOWN>will go the the next/previous channel, in the list of all channels.
Pressing <RIGHT>/<LEFT>will go the next/previous channel of the channel class list.
7. TITLE/TTX
IN DVB mode press <TTX>button will display teletext informa tion if channel have teletext informatin
Figur(1)TTXMenu
8. GOTO
In DVB mode, pressing
<GOTO> will enter the Auto Scan menu, as shown in Figure (2).
-12- Function
8. SETUP
Pressing <SETUP> will enter the setup menu. Within the setup menu in DVB mode,
Pressing <S ET U P> wi l l g o u p o n e level in the menu, or exit the setup menu if already at the top level.
9. ZOOM
Press <ZOOM> multiple times to enlarge (2X, 3X, 4X) or shrink (1/2, 1/3, 1/4) the
display, in that order. The OSD will display the current zoom mode.
10. NUM Number
For DVB mode, use <0> to <9> to directly input a two digital
channel number. The <10+> key has no effect in this mode.
11. AUDIO
In DVB mode, use this button to select different
languages on the current channel.
12. L/R
Press <L/R> to select between Stereo, Mono Left, and Mono Right audio Channels.
13. DISPLAY
In DVB mode, press <DISPLAY> to bring up the program detail information display,
which has information regarding this channel, as shown in Figure .(3)
Figur (2)Auto Scan Menu
Figure (3) Program Detail Information
-13-