Chapter 2 Operation Guide; Turning On The Machine; First Time Setup - NPG DVD-T 901H Instruction Manual

Function
14. ENTER
Pressing <ENTER>willenterthe selected item in a menu.
15. PROG/EPG
In DVB mode, pressing <PROG/EPG> will display the EPG (Electronic Program Guide) Menu,if the
channel have EPG znformation will Display in EPG menu.
16. P/N PAL/NTSC
Switch between PAL and NTSC TV output formats. Formats are NTSC, PAL, and AUTO.
17. TV/RADIO
In DVB mode , press.(TV/RADIO) to switch between television and
radio mode.
18. VCR
If connect the VCR Scart to the record TV scart of,the signal then Can be output from
the local TV To Scart.as show in Figure(5).
20. CH+/CH-
In DVB mode press A button will goto the NEXT channel press T button will goto the Back channel.
-14-
Figure(5)VCR
System Setup

Chapter 2 Operation Guide

1. Turning on the Machine

Press the <POWER> button on the remote control to turn on the machine. The Sunplus logo
should be displayed, as in Figure (6). The machine will enter the DVD mode (DVD or DVB) that it
was in when last turned off. If thema chine enters DVD mode, it will check thedisc type and
automatically start playback. For DVB mode, it will select the last channel watched, and set Ul
language to English. Iftherewasno last channel watched, or it is the first time powered-on, a
message will appear, asking if the user wants to run the First Time Installation Wizard.

2.First Time Setup

In Figure (7), a message appears, asking the user if he/she wants to run the First Time Installation Wizard.
Upon selecting "Yes" , a new box appears, shown in Figure (8), asking for country, OSD language. Use the
arrow keys to make the correct selections. Select "Next" and press<ENTER>to proceed to the next
screen, which is shown in Figure (9). On this screen, the user will be asked if he/she wants to perform an
auto-scan of the channels. If the user selects "Yes" , a new window, will start Auto scan
-15-