Table of Contents
Advertisement
b. b. b. The
The a a a larm
The
larm
larm state
state
state setting
setting
setting
Press the"up button"or"down button",move the menu choice bar to "Alarm",then choose the alarm
state (on/off) by pressing the "menu button", choose "on"to start the alarm function, and choose "off"
to close it for good.
b) b) b) Pulse
Pulse sound
Pulse
sound indication
sound
indication setting
indication
On the main menu interface,press the"up button"or"down button",move the menu choice bar to"Pulse
Sound", then choose the pulse sound indication state (on/off) by pressing the "menu button",press
"on" to start the function, and press "off" to close it.
c) c) c) Backlight
Backlight
Backlight adjustment
adjustment
adjustment
On the main menu interface,press the"up button"or"down button",move the menu choice bar to
"Brightness",then press the"menu button"to change the number in order to adjust the brightness of
screen.
d) d) d) Data
Data
Data storage
storage setting
storage
setting
setting
This device has the function of 24 hours data storage , it has the capability of accurately storing pulse
rate and SpO
data, then transmit the data to computer with the data line for replay and analysis.
2
a. a. a. On the main menu interface,press the"up button"or"down button",move the menu choice bar
to"Record",then press the"menu button"again to enter the dialog box of figure 7:if it is in recording
state,the"Stop"is displayed on menu;if it is not in recording state,the"Start"is displayed on menu.
b. b. b. When the"Start"is displayed on the menu,if the memory still have the former data in storage ,the
" Do you really want to recover the memory" dialog box will be displayed when pressing the
"menu"button ,then press the"up button"or"down button"to choose setting,then press the"menu
button"to confirm setting,the dialog box will be displayed as figure 8:It needs to set the starting time
for data storage by users, users can change the setting value by pressing the"up button"or"down
button",and confirm the setting value by pressing the"menu button",the black cursor will move to
Figure 6.
setting
setting
Figure 7.
7
Advertisement
Table of Contents
