Display Screen; Settings - Ecom Ex-MX2 Safety Instructions

8.3 Display screen

Laser
Maximum setting
reached
Battery condition

8.4 Settings

System settings can be fixed and activated with the switch panel.
Description:
Adjustment Standard
LOCK OFF
° C / °F OFF
Buzzer ON
backlight OFF
Set Default OFF
Setup ON
Laserflash ON
Laser ON
Continuous measurement
MIN/MAX display of the
last measurement
Remove the leather pouch and open
the casing with the handle as shown.
Description
Measuring remains active until the
measurement button is pressed again.
Changing the display between °C and
°F
audible alarm
display lighting
Activation of the factory defaults
activates alarm value and emissivity
adjustment
Laser flashing with Hl alarm
Laser is switched on
Measured temperature
Bar display of the last 10
measured values
Emissivity
27