Accessing The User Login Feature; Logging In As A User - Motorola ASTRO APX 6000XE Series User Manual



Accessing the User Login Feature

This feature allows you as the user to be associated with the
radio. With this association, every data application (Example:
Text Messaging Service) takes on a friendly username.
You can still send text messages without logging in as a user.
The user login feature only enables the recipient of your
message to identify you as the sender by assigning a username
to your message.
Note: A predefined username that's set more than the
maximum allowed characters is an invalid name.


Logging In as a User

Procedure:
Press the preprogrammed User Login button and proceed to
Step 3.
OR
Follow the procedure below.
1 < >
or to User.
2
Press the Menu Select button directly below User.
3
The display shows the User Login screen.
4 U D
or to {ID Entry} and press the Menu Select button
directly below Edit to enter ID.
A blinking cursor appears on the screen.
Use the keypad to type or edit a username.
78
English
<
Press to move one space to the left.
>
Press to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
*
Press to add a space.
0
Press to toggle between mixed case mode, uppercase
mode, and lowercase mode.
#
Press to toggle between numeric and letter mode.
Press the Menu Select button directly below Ok to submit.
OR
U D
or to scroll through the list of predefined usernames.
Press the Menu Select button directly below Sel to select
the predefined username.
OR
U D
Press and hold or to scroll through the list of predefined
usernames at a fast scroll rate.
Press the Menu Select button directly below Sel to select
the predefined username.
5
If the ID is invalid, the display shows momentary Invalid ID.
Repeat Step 4.
OR
Enter your Personal Identification Number (PIN) number.
6
Press the Menu Select button directly below Logn.
7
In ARS Server Mode, the display shows the User Login
Indicator icon, the ID, and In progress, with Cncl.
OR
In ARS Non-Server Mode, the display shows the User Login