Viewing and Changing a Site
This feature allows you to view the name of the current site or
forces your radio to change to a new one.
Viewing the Current Site
Procedure:
1
Press the preprogrammed Site Displ/Srch button.
2
The display shows momentary the name of the current site
and its corresponding received signal strength indicator
(RSSI).
Changing the Current Site
Procedure:
1
Press and hold down the preprogrammed Site Displ/Srch
button.
2
You hear a tone and the display shows momentary
Scanning site.
3
When the radio finds a new site, it returns to the Home
screen.
116
English
Mission Critical Wireless (MCW)
®
- Bluetooth
-
Note:
The use of this feature requires the "Full Feature"
expansion board together with the Bluetooth Software.
This feature allows your radio to extend its functionality by
connecting to external proprietary Motorola accessories.
Note:
It is recommended to use Motorola proprietary MCW
devices with APX radios during Mission Critical
operations as other Bluetooth devices may or may not
meet the mission critical standard.
The default setting for Bluetooth-enabled radio is Bluetooth ON.
See Turning the Bluetooth Off on page 117 to turn the
Bluetooth OFF.
Note:
Your radio must be preprogrammed to allow you to use
this feature.
Currently your radio supports the following Bluetooth devices or
profiles.
•
Headset (HSP)
•
Dial Up Networking (DUN)
•
Personal Area Networking (PAN)
•
Serial Port (SPP)