Using The Talkgroup Call Feature (Conventional Operation Only); Selecting A Talkgroup; Sending A Status Call - Motorola ASTRO APX 6000XE Series User Manual

6
Release the PTT button to listen.
7 H
Press to return to the Home screen.

Using the Talkgroup Call Feature (Conventional
Operation Only)
This feature allows you to define a group of conventional
system users so that they can share the use of a conventional
channel.
Note: Encryption keys are associated to talkgroups. When
talkgroups are associated, encryption keys are
changed by changing the active talkgroup. See Secure
Operations on page 96 for more information.


Selecting a Talkgroup

Procedure:
1 < >
or to Tgrp.
2
Press the Menu Select button directly below Tgrp. The
display shows the last talkgroup that was selected and
stored, Sel and Exit.
3 U D
or to Preset for the preset preprogrammed talkgroup.
OR
U D
or to the required talkgroup.
OR
Use the keypad to enter the number of the corresponding
talkgroup in the list.
4
Press the Menu Select button directly below Sel to save the
currently selected talkgroup and return to the Home screen.
5
If the encryption key associated to the new talkgroup is
erased, you hear a momentary key fail tone and the display
shows Key fail.
OR
If the encryption key that is associated to the new talkgroup
is not allowed, you hear a momentary key fail tone and the
display shows Illegal key.
6 H
Press to return to the Home screen.


Sending a Status Call

This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A maximum
of eight status conditions is possible.
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Procedure:
Press the preprogrammed Status button and proceed to
Step 3.
49
English