Phone Function List - Dynamix IP Phone User Manual

5

Phone function list

When your DW IP Phone is configured properly, you can make a phone call to your friend located in the same
service provider. If you want to make a phone call, you can dial the phone number then press "#" button to start
to dial the phone number or wait for a while then system will dial the number automatically.
The DW IP Phone provides some functions that list as below:
1. Call Hold: You can push the Hold key to hold the current call for a while, then push Hold key again to
keep talking.
2. Call Waiting: When a new call is coming while you are talking, you can push the Flash button to
switch to the new call. You can push the Flash button to switch between the two calls.
3. 3-Way Conference: If you want to make a 3-way conference call, you can make a phone call to the
first phone number. After the call is established, push the Flash/Hold button then you can hear the
Dial tone, then make a phone call to the second phone number. When the second call is established,
press the Flash button again.
4. Call Transfer: Current we can support 3 kind of transfer application. Below is the operation method.
A. Normal Transfer: A call B then transfer to C
Step 1: A call B
Step 2: B press "Flash" then A will be held
Step 3: Make a new call to C
Step 4: After C answer the call the press "Flash" to complete transfer
B. 2 way Transfer: A call B then transfer to C but C is busy or C reject transfer then B want the
call back to A
Step 1: A call B
Step 2: B press "Flash" then A will be held
Step 3: Make a new call to C
Step 4: If C is busy or reject then B hang up the phone
Step 5: Press "Line 1" to restore call with A
C. Blind Transfer: A call B then transfer to C and do not care about C's situation
Step 1: A call B
Step 2: B press "Blind transfer" then A will be held
Step 3: Make a new call to C
Step 4: B hang up the phone
5. Redial: User can push the Redial button to dial the last dialed number.
6. Flash: User can push the Flash button to make the IP Phone to dial mode.
7. Speaker Phone: You can use Speaker phone to make a phone call.
8. Pre Dial: User can dial the number first, after finished then raise the handset or push the speaker
button; the IP Phone will start to dial.
54/54
IP Phone
User Manual
Dynamix IP Phone User Manual