Sip Settings - Dynamix IP Phone User Manual

3.6

SIP Settings

3.6.1 In SIP Settings you can setup the Service Domain, Port Settngs, Codec Settings, Codec ID
Settings, RTP Setting, RPort Setting and Other Settings. If the VoIP service is provided by
ISP, you need to setup the related informations correctly then you can register to the SIP
Proxy Server correctly.
3.6.2 In Service Domain Function you need to input the account and the related informations in
this page, please refer to your ISP provider. You can register three SIP account in the DW
IP Phone. You can dial the DW IP Phone to your friends via first enable SIP account and
receive the phone from these three SIP accounts.
3.6.2.1 First you need click Active to enable the Service Domain, then you can input the
following items:
3.6.2.1.1 Display Name: you can input the name you want to display.
3.6.2.1.2 User Name: you need to input the User Name get from your ISP.
3.6.2.1.3 Register Name: you need to input the Register Name get from your ISP.
3.6.2.1.4 Register Password: you need to input the Register Password get from your ISP.
3.6.2.1.5 Domain Server: you need to input the Domain Server get from your ISP.
3.6.2.1.6 Proxy Server: you need to input the Proxy Server get from your ISP.
3.6.2.1.7 Outbound Proxy: you need to input the Outbound Proxy get from your ISP. If your ISP
does not provide the information, then you can skip this item.
3.6.2.1.8 You can see the Register Status in the Status item. If the item shows "Registered",
then your DW IP Phone is registered to the ISP, you can make a phone call direcly.
3.6.2.1.9 If you have more than one SIP account, you can following the steps to register to the
other ISP.
3.6.2.1.10 3.2.6.2.1.10 When you finished the setting, please click the Submit button.
3.2.6.2.1.11 MWI: Just support "Subscribe MWI mode".
31/54
IP Phone
User Manual
Dynamix IP Phone User Manual