Toneset.htm; Speakerset.htm - Dynamix IP Phone User Manual

4.2

Toneset.htm

4.2.1 You have to login the system first then change the webpage to toneset.htm manually
(http://ip
4.2.2 In this page you can setup the Tone frequency and cadence to meet the requirement.
4.3

Speakerset.htm

4.3.1 You have to login the system first then change the webpage to speakerset.htm manually
(http://ip
4.3.2 In this page you can setup the Speaker function. Default we set the speaker is in
half-duplex mode. If you want to set to full-duplex mode, it need to check if your housing is
suitable for this function. Or you have to set it as half-duplex mode.
address:9999/toneset.htm).
address:9999/toneset.htm).
45/54
IP Phone
User Manual
Dynamix IP Phone User Manual