Connecting Your Phone - Dynamix E210 User Manual

2. Connecting Your Phone

Your system administrator will likely connect your new Dynamix E210 IP Phone to the corporate
IP telephony network. If that is not the case, refer to the graphic and table below to connect your
phone.
1) Open the box of Dynamix E210 IP Phone, carefully check the packing list as follow:
Item
IP Phone
Handset
Handset Cord
Power adapter
RJ45 cable
RJ11 cable
CD
Quick Installation
Quick User Guide
2) As shown in figure 2.1, please plug Handset Cord into RJ11 interfaces (IP Phone and
Handset), RJ45 cable into the LAN interface
3) The phone must work together with power adapter.
4) If you want connect your computer into LAN at the same time, please connect your
computer to PC interface of the phone with a RJ45 cable.
Figure2.1 Interfaces of Dynamix E210 IP Phone
____________________________________________________________________________________________
Counts
1
1
1
1
1
1
1
1
1
3
Dynamix E210 IP Phone
www.godynamix.com